Test and vendor models
Point names are the ones records use; [*] stands for a repeating group's index. See Supported SunSpec models for every group.
| Model | Name in records | Points |
|---|---|---|
| 63001 | model_63001 | 59 |
| 63002 | model_63002 | 2 |
| 64001 | model_64001 | 35 |
| 64020 | model_64020 | 30 |
| 64101 | model_64101 | 7 |
| 64111 | model_64111 | 18 |
| 64112 | model_64112 | 58 |
| 64410 | DCSimInterface | 32 |
| 64411 | ACSimInterface | 51 |
| 64412 | DERExploitation | 43 |
| 64413 | PVSimCurves | 5 |
| 64414 | DERSimControls | 9 |
| 64415 | CSIPControl | 5 |
Model 63001: SunSpec Test Model 1
Name in records: model_63001.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
int16_1 | int16 | |||
int16_2 | int16 | |||
int16_3 | int16 | |||
int16_4 | int16 | |||
int16_5 | int16 | |||
int16_u | int16 | |||
uint16_1 | uint16 | |||
uint16_2 | uint16 | |||
uint16_3 | uint16 | |||
uint16_4 | uint16 | |||
uint16_5 | uint16 | |||
uint16_u | uint16 | |||
acc16 | acc16 | |||
acc16_u | acc16 | |||
enum16 | enum16 | |||
enum16_u | enum16 | |||
bitfield16 | bitfield16 | |||
bitfield16_u | bitfield16 | |||
int32_1 | int32 | |||
int32_2 | int32 | |||
int32_3 | int32 | |||
int32_4 | int32 | |||
int32_5 | int32 | |||
int32_u | int32 | |||
uint32_1 | uint32 | |||
uint32_2 | uint32 | |||
uint32_3 | uint32 | |||
uint32_4 | uint32 | |||
uint32_5 | uint32 | |||
uint32_u | uint32 | |||
acc32 | acc32 | |||
acc32_u | acc32 | |||
enum32 | enum32 | |||
enum32_u | enum32 | |||
bitfield32 | bitfield32 | |||
bitfield32_u | bitfield32 | |||
ipaddr | ipaddr | |||
ipaddr_u | ipaddr | |||
int64 | int64 | |||
int64_u | int64 | |||
acc64 | acc64 | |||
acc64_u | acc64 | |||
ipv6addr | ipv6addr | |||
ipv6addr_u | ipv6addr | |||
float32 | float32 | |||
float32_u | float32 | |||
string | string | |||
string_u | string | |||
repeating[*].int16_11 | int16 | |||
repeating[*].int16_12 | int16 | |||
repeating[*].int16_u | int16 | |||
repeating[*].uint16_11 | uint16 | |||
repeating[*].uint16_12 | uint16 | |||
repeating[*].uint16_13 | uint16 | |||
repeating[*].uint16_u | uint16 | |||
repeating[*].int32 | int32 | |||
repeating[*].int32_u | int32 | |||
repeating[*].uint32 | uint32 | |||
repeating[*].uint32_u | uint32 |
Model 63002: SunSpec Test Model 2
Name in records: model_63002.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
repeating[*].int16_1 | int16 | |||
repeating[*].int16_2 | int16 |
Model 64001: Veris Status and Configuration
Name in records: model_64001.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
Cmd | enum16 | Command Code | ||
HWRev | uint16 | Hardware Revision | ||
RSFWRev | uint16 | RS FW Revision | ||
OSFWRev | uint16 | OS FW Revision | ||
ProdRev | string | Product Revision | ||
Boots | uint16 | Boot Count | ||
Switch | bitfield16 | DIP Switches | ||
Sensors | uint16 | Num Detected Sensors | ||
Talking | uint16 | Num Communicating Sensors | ||
Status | bitfield16 | System Status | ||
Config | bitfield16 | System Configuration | ||
LEDblink | uint16 | Pct | LED Blink Threshold | |
LEDon | uint16 | Pct | LED On Threshold | |
Reserved | uint16 | |||
Loc | string | Location String | ||
S1ID | enum16 | Sensor 1 Unit ID | ||
S1Addr | uint16 | Sensor 1 Address | ||
S1OSVer | uint16 | Sensor 1 OS Version | ||
S1Ver | string | Sensor 1 Product Version | ||
S1Serial | string | Sensor 1 Serial Num | ||
S2ID | enum16 | Sensor 2 Unit ID | ||
S2Addr | uint16 | Sensor 2 Address | ||
S2OSVer | uint16 | Sensor 2 OS Version | ||
S2Ver | string | Sensor 2 Product Version | ||
S2Serial | string | Sensor 2 Serial Num | ||
S3ID | enum16 | Sensor 3 Unit ID | ||
S3Addr | uint16 | Sensor 3 Address | ||
S3OSVer | uint16 | Sensor 3 OS Version | ||
S3Ver | string | Sensor 3 Product Version | ||
S3Serial | string | Sensor 3 Serial Num | ||
S4ID | enum16 | Sensor 4 Unit ID | ||
S4Addr | uint16 | Sensor 4 Address | ||
S4OSVer | uint16 | Sensor 4 OS Version | ||
S4Ver | string | Sensor 4 Product Version | ||
S4Serial | string | Sensor 4 Serial Num |
Model 64020: Mersen GreenString
Name in records: model_64020.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
Aux0Tmp | int16 | C | Aux 0 temperature | |
Aux1Tmp | int16 | C | Aux 1 temperature | |
Aux2Tmp | int16 | C | Aux 2 temperature | |
Aux3Tmp | int16 | C | Aux 3 temperature | |
Aux4Tmp | int16 | C | Aux 4 temperature | |
ProbeTmp | int16 | C | Probe Temperature | |
MainTmp | int16 | C | Main Temperature | |
Sensor1Voltage | int16 | V | Sensor1 Voltage | scale of 0-10V |
Sensor2Voltage | int16 | V | Sensor2 Voltage | scale of 0-10V |
Sensor3Voltage | int16 | V | Sensor3 Voltage | scale of 0-10V |
Sensor4Voltage | int16 | V | Sensor4 Voltage | scale of 0-10V |
Sensor5Voltage | int16 | V | Sensor5 Voltage | scale of 0-10V |
Sensor6Voltage | int16 | V | Sensor6 Voltage | scale of 0-10V |
Sensor7Voltage | int16 | V | Sensor7 Voltage | scale of 0-10V |
Sensor1Current | int16 | A | Sensor1 Current | scale of 4-20mA |
Sensor2Current | int16 | A | Sensor2 Current | in 4-20mA or 4-20mA |
Sensor3Current | int16 | A | Sensor3 Current | in 4-20mA or 4-20mA |
Sensor4Current | int16 | A | Sensor4 Current | in 4-20mA or 4-20mA |
Sensor5Current | int16 | A | Sensor5 Current | in 4-20mA or 4-20mA |
Sensor6Current | int16 | A | Sensor6 Current | in 4-20mA or 4-20mA |
Sensor7Current | int16 | A | Sensor7 Current | in 4-20mA or 4-20mA |
Sensor8 | uint16 | Hz | Sensor8 frequency | frequency in Hz |
Relay1 | uint16 | Relay 1 state | ||
Relay2 | uint16 | Relay 2 state | ||
Relay3 | uint16 | Relay 3 state | ||
ResetAccumulators | uint16 | Reset the accumulators | always 0 in reading, used the code 0xC0DA during the writing for resetting them | |
Reset | uint16 | Reset the system | always 0 in reading, used the code 0xC0DA during the writing for resetting the system | |
repeating[*].SerialNumber | string | Serial number | strings of 16 characters | |
repeating[*].Firmware | string | Firmware version | string of 11 characters | |
repeating[*].Hardware | uint16 | Hardware version |
Model 64101: Eltek Inverter Extension
Name in records: model_64101.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
Eltek_Country_Code | uint16 | |||
Eltek_Feeding_Phase | uint16 | |||
Eltek_APD_Method | uint16 | |||
Eltek_APD_Power_Ref | uint16 | |||
Eltek_RPS_Method | uint16 | |||
Eltek_RPS_Q_Ref | uint16 | |||
Eltek_RPS_CosPhi_Ref | int16 |
Model 64111: Basic Charge Controller
Name in records: model_64111.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
Port | uint16 | Port Number | ||
BattV | uint16 | V | Battery Voltage | |
ArrayV | uint16 | V | Array Voltage | |
OutputA | uint16 | A | Output Current | |
InputA | uint16 | A | Array Current | |
ChargerSt | enum16 | Operating State | ||
OutputW | uint16 | W | Output Wattage | |
TodayMinBatV | uint16 | V | Today's Minimum Battery Voltage | |
TodayMaxBatV | uint16 | V | Today's Maximum Battery Voltage | |
VOCV | uint16 | V | VOC | |
TodayMaxVOC | uint16 | V | Today's Maximum VOC | |
TodaykWhOutput | uint16 | kWh | Today's kWh | |
TodayAHOutput | uint16 | AH | Today's AH | |
LifeTimeKWHOut | uint16 | kWh | Lifetime kWh | |
LifeTimeAHOut | uint16 | kAH | Lifetime kAH | |
LifeTimeMaxOut | uint16 | W | Lifetime Maximum Output Wattage | |
LifeTimeMaxBatt | uint16 | V | Lifetime Maximum Battery Voltage | |
LifeTimeMaxVOC | uint16 | V | Lifetime Maximum VOC Voltage |
Value names:
ChargerSt(enum16): 0Off, 1Float, 2Bulk, 3Absorb, 4EQ
Model 64112: OutBack FM Charge Controller
Name in records: model_64112.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
Port | uint16 | Port Number | ||
CC_Config_fault | bitfield16 | Faults | ||
CC_Config_absorb_V | uint16 | V | Absorb | |
CC_Config_absorb_Hr | uint16 | Tmh | Absorb Time | |
CC_Config_absorb_End_A | uint16 | A | Absorb End | |
CC_Config_rebulk_V | uint16 | V | Rebulk | |
CC_Config_float_V | uint16 | V | Float | |
CC_Config_max_Chg_A | uint16 | A | Maximum Charge | |
CC_Config_equalize_V | uint16 | V | Equalize | |
CC_Config_equalize_Hr | uint16 | Tmh | Equalize Time | |
CC_Config_auto_equalize | uint16 | Tmd | Auto Equalize Interval | |
CC_Config_MPPT_mode | enum16 | MPPT mode | ||
CC_Config_sweep_width | enum16 | Sweep Width | ||
CC_Config_sweep_max | enum16 | Sweep Maximum | ||
CC_Config_U_Pick_Duty_cyc | uint16 | Pct | U-Pick PWM Duty Cycle | |
CC_Config_grid_tie | enum16 | Grid Tie Mode | ||
CC_Config_temp_comp | enum16 | Temp Comp Mode | ||
CC_Config_temp_comp_llimt | uint16 | V | Temp Comp Lower Limit | |
CC_Config_temp_comp_hlimt | uint16 | V | Temp Comp Upper Limit | |
CC_Config_auto_restart | enum16 | Auto Restart Mode | ||
CC_Config_wakeup_VOC | uint16 | V | Wakeup VOC Change | |
CC_Config_snooze_mode_A | uint16 | A | Snooze Mode | |
CC_Config_wakeup_interval | uint16 | Tms | Wakeup Interval | |
CC_Config_AUX_mode | enum16 | AUX Output Mode | ||
CC_Config_AUX_control | enum16 | AUX Output Control | ||
CC_Config_AUX_state | enum16 | AUX Output State | ||
CC_Config_AUX_polarity | enum16 | AUX Output Polarity | ||
CC_Config_AUX_L_Batt_disc | uint16 | V | AUX Low Battery Disconnect | |
CC_Config_AUX_L_Batt_rcon | uint16 | V | AUX Low Battery Reconnect | |
CC_Config_AUX_L_Batt_dly | uint16 | Tms | AUX Low Battery Disconnect Delay | |
CC_Config_AUX_Vent_fan_V | uint16 | V | AUX Vent Fan | |
CC_Config_AUX_PV_triggerV | uint16 | V | AUX PV Trigger | |
CC_Config_AUX_PV_trg_h_tm | uint16 | Tms | AUX PV Trigger Hold Time | |
CC_Config_AUX_Nlite_ThrsV | uint16 | V | AUX Night Light Threshold | |
CC_Config_AUX_Nlite_On_tm | uint16 | Tmh | AUX Night Light On Time | |
CC_Config_AUX_Nlite_On_hist | uint16 | Tms | AUX Night Light On Hysteresis | |
CC_Config_AUX_Nlite_Off_hist | uint16 | Tms | AUX Night Light Off Hysteresis | |
CC_Config_AUX_Error_batt_V | uint16 | V | AUX Error Output Low Battery | |
CC_Config_AUX_Divert_h_time | uint16 | Tms | AUX Divert Hold Time | |
CC_Config_AUX_Divert_dly_time | uint16 | Tms | AUX Divert Delay Time | |
CC_Config_AUX_Divert_Rel_V | uint16 | V | AUX Divert Relative | |
CC_Config_AUX_Divert_Hyst_V | uint16 | V | AUX Divert Hysteresis | |
CC_Config_MajorFWRev | uint16 | FM CC Major Firmware Number | ||
CC_Config_MidFWRev | uint16 | FM CC Mid Firmware Number | ||
CC_Config_MinorFWRev | uint16 | FM CC Minor Firmware Number | ||
CC_Config_DataLog_Day_offset | uint16 | Tmd | Set Data Log Day Offset | |
CC_Config_DataLog_Cur_Day_off | uint16 | Tmd | Current Data Log Day Offset | |
CC_Config_DataLog_Daily_AH | uint16 | Ah | Data Log Daily (Ah) | |
CC_Config_DataLog_Daily_KWH | uint16 | kWh | Data Log Daily (kWh) | |
CC_Config_DataLog_Max_Out_A | uint16 | A | Data Log Daily Maximum Output (A) | |
CC_Config_DataLog_Max_Out_W | uint16 | W | Data Log Daily Maximum Output (W) | |
CC_Config_DataLog_Absorb_T | uint16 | Tms | Data Log Daily Absorb Time | |
CC_Config_DataLog_Float_T | uint16 | Tms | Data Log Daily Float Time | |
CC_Config_DataLog_Min_Batt_V | uint16 | V | Data Log Daily Minimum Battery | |
CC_Config_DataLog_Max_Batt_V | uint16 | V | Data Log Daily Maximum Battery | |
CC_Config_DataLog_Max_Input_V | uint16 | V | Data Log Daily Maximum Input | |
CC_Config_DataLog_Clear | uint16 | Data Log Clear | ||
CC_Config_DataLog_Clr_Comp | uint16 | Data Log Clear Complement |
Value names:
CC_Config_MPPT_mode(enum16): 0Auto, 1U_Pick, 2WindCC_Config_sweep_width(enum16): 0Half, 1FullCC_Config_sweep_max(enum16): 0Eighty_Percent, 1Eighty_Five_Percent, 2Ninty_Percent, 3Ninty_Nine_PercentCC_Config_grid_tie(enum16): 0Disabled, 1EnabledCC_Config_temp_comp(enum16): 0Wide, 1LimitedCC_Config_auto_restart(enum16): 0Off, 1Every_90_Minutes, 2Every_90_Minutes_if_Absorb_or_FloatCC_Config_AUX_mode(enum16): 0Float, 1Diversion_Relay, 2Diversion_Solid_St, 3Low_Batt_Disconnect, 4Remote, 5Vent_Fan, 6PV_Trigger, 7Error_Output, 8Night_LightCC_Config_AUX_control(enum16): 0Off, 1Auto, 2OnCC_Config_AUX_state(enum16): 0Disabled, 1EnabledCC_Config_AUX_polarity(enum16): 0Low, 1High
Model 64410: DC Simulator Control Interface
Name in records: DCSimInterface.
A generic DC simulator/power supply control interface for DER electrical testing.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
VMaxLim | uint16 | V | Maximum Voltage | Upper Voltage Protection Limit |
PMaxLim | uint16 | W | Maximum Power | Upper Power Protection Limit |
IMaxLim | uint16 | A | Maximum Current | Upper Current Protection Limit |
Mode | enum16 | CV or CC Mode | Constant Voltage (CV) or Constant Current (CC) Mode | |
Ena | enum16 | Power On/Off | Power On/Off | |
Reset | enum16 | Reset Device | Reset Device | |
VSet | uint16 | V | Voltage Setpoint | Voltage Setpoint |
PSet | uint16 | W | Power Setpoint | Power Setpoint |
ISet | uint16 | A | Current Setpoint | Current Setpoint |
EN50530 | enum16 | EN50530 Mode | EN50530 Mode - Enable or disable EN50530 profile mode | |
Vmpp | uint16 | V | EN50530 MPP Voltage | EN50530 MPP Voltage |
Pmpp | uint16 | W | EN50530 MPP Power | EN50530 MPP Power |
GSet | uint16 | W/m^2 | Irradiance Setpoint | Irradiance Setpoint |
VSlewRate | uint16 | V/s | Voltage Slew Rate | Voltage Slew Rate |
PSlewRate | uint16 | W/s | Power Slew Rate | Power Slew Rate |
ISlewRate | uint16 | A/s | Current Slew Rate | Current Slew Rate |
EnaProf | enum16 | Enable Profile | Start/Stop the Profile | |
AdptProfReq | uint16 | Profile Adoption Request | Index of profile points to adopt. First curve index is 1. | |
AdptProfRslt | enum16 | Adopt Profile Result | Result of last adopt profile operation. | |
V | int32 | Measured Voltage | Measured Voltage | |
P | int32 | Measured Power | Measured Power | |
I | int32 | Measured Current | Measured Current | |
Errors | string | Errors | Error States | |
NPt | uint16 | Number Of Points | Number of profile points supported. | |
NProf | uint16 | Stored Profile Count | Number of stored profiles supported. | |
Prof[*].ActPt | uint16 | Active Points | Number of active points. | |
Prof[*].DeptRef | bitfield32 | Dependent References | Profile references. | |
Prof[*].Pt[*].Tms | uint16 | Sec | Profile Time | Profile time. |
Prof[*].Pt[*].V | uint16 | V | Voltage Point | Profile voltage point in Volts. |
Prof[*].Pt[*].P | uint16 | W | Power Point | Profile power point in Watts. |
Prof[*].Pt[*].I | uint16 | A | Current Point | Profile current point in Amps. |
Prof[*].Pt[*].G | uint16 | Pct | Irradiance Point | Profile irradiance point as percentage. |
Value names:
Mode(enum16): 0CV, 1CCEna(enum16): 1ON, 0OFFReset(enum16): 1RESET, 0DO_NOT_RESETEN50530(enum16): 1EN50530, 0DO_NOT_EN50530EnaProf(enum16): 1START, 0STOPAdptProfRslt(enum16): 0IN_PROGRESS, 1COMPLETED, 2FAILEDProf[*].DeptRef(bitfield32): bit 0VOLTAGE, bit 1POWER, bit 2CURRENT, bit 3IRRADIANCE
Model 64411: AC Simulator Control Interface
Name in records: ACSimInterface.
A generic AC simulator/power supply control interface for DER electrical testing.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
Phases | uint16 | Active Phases | Set the number of active phases for the power supply | |
PhaseAngle | uint16 | Phase Angle | Phase angle (deg) between phases. 0 for signle phase, 120 for two phase, 120 for three phase. | |
VNom | uint16 | V | Nominal Voltage | Nominal L-N Voltage |
VMax | uint16 | V | Maximum Voltage | Maximum Voltage Protection Level |
IMax | uint16 | A | Maximum Current | Maximum Current Protection Level |
Freq | uint16 | Hz | Frequency | Frequency Setpoint |
Output | enum16 | Output State | AC Output State | |
Relay | enum16 | Relay State | AC Relay State | |
Regen | enum16 | Regeneration State | Regeneration State | |
VSet | uint16 | V | Voltage Setpoint | Voltage Setpoint (all phases) |
VSetA | uint16 | V | Voltage Setpoint Phase A | Voltage Setpoint Phase A |
VSetB | uint16 | V | Voltage Setpoint Phase B | Voltage Setpoint Phase B |
VSetC | uint16 | V | Voltage Setpoint Phase C | Voltage Setpoint Phase C |
FreqSlew | uint16 | Hz/s | Frequency Slew Rate | Frequency Slew Rate |
VSlew | uint16 | V/s | Voltage Slew Rate | Voltage Slew Rate |
VA | int32 | V | Measured Voltage Phase A | Measured Voltage Phase A |
VB | int32 | V | Measured Voltage Phase B | Measured Voltage Phase B |
VC | int32 | V | Measured Voltage Phase C | Measured Voltage Phase C |
Hz | int32 | Hz | Measured Frequency | Measured Frequency |
IA | int32 | A | Measured Current Phase A | Measured Current Phase A |
IB | int32 | A | Measured Current Phase B | Measured Current Phase B |
IC | int32 | A | Measured Current Phase C | Measured Current Phase C |
VHarA | string | V | Voltage Harmonics Phase A | Voltage Harmonics Pct, Phase A (comma seperated string for harmonics 1-50) |
VHarB | string | V | Voltage Harmonics Phase B | Voltage Harmonics Pct, Phase B (comma seperated string for harmonics 1-50) |
VHarC | string | V | Voltage Harmonics Phase C | Voltage Harmonics Pct, Phase C (comma seperated string for harmonics 1-50) |
IHarA | string | A | Current Harmonics Phase A | Current Harmonics Pct, Phase A (comma seperated string for harmonics 1-50) |
IHarB | string | A | Current Harmonics Phase B | Current Harmonics Pct, Phase B (comma seperated string for harmonics 1-50) |
IHarC | string | A | Current Harmonics Phase C | Current Harmonics Pct, Phase C (comma seperated string for harmonics 1-50) |
IIntHarA | string | A | Current Interharmonics Phase A | Current Interharmonics Pct, Phase A (comma seperated string for interharmonics 1-50) |
IIntHarB | string | A | Current Interharmonics Phase B | Current Interharmonics Pct, Phase B (comma seperated string for interharmonics 1-50) |
IIntHarC | string | A | Current Interharmonics Phase C | Current Interharmonics Pct, Phase C (comma seperated string for interharmonics 1-50) |
VThdA | uint16 | % | Voltage THD Phase A | Voltage THD Phase A |
VThdB | uint16 | % | Voltage THD Phase B | Voltage THD Phase B |
VThdC | uint16 | % | Voltage THD Phase C | Voltage THD Phase C |
IThdA | uint16 | % | Current THD Phase A | Current THD Phase A |
IThdB | uint16 | % | Current THD Phase B | Current THD Phase B |
IThdC | uint16 | % | Current THD Phase C | Current THD Phase C |
EnaProf | enum16 | Enable Profile | Start/Stop the AC Profile | |
ProfRslt | enum16 | Profile Result | Result of last profile operation. | |
NProf | uint16 | Stored Profile Count | Number of stored profiles supported. | |
NPt | uint16 | Max Profile Point Count | Max profile points in the profiles. | |
Prof[*].Name | string | Profile Name | Profile name. | |
Prof[*].ActPt | uint16 | Active Points | Number of active points. | |
Prof[*].Pt[*].Tms | uint16 | Sec | Profile Time | Profile time. |
Prof[*].Pt[*].VA | uint16 | V | Voltage Point | Profile voltage phase A point in Volts. |
Prof[*].Pt[*].VB | uint16 | V | Voltage Point Phase B | Profile voltage phase B point in Volts. |
Prof[*].Pt[*].VC | uint16 | V | Voltage Point Phase C | Profile voltage phase C point in Volts. |
Prof[*].Pt[*].Hz | uint16 | Hz | Frequency Point | Profile frequency point in Hz. |
Prof[*].Pt[*].PhaseAngleA | uint16 | Degrees | Phase Angle A | Profile phase A angle in degrees. |
Prof[*].Pt[*].PhaseAngleB | uint16 | Degrees | Phase Angle B | Profile phase B angle in degrees. |
Prof[*].Pt[*].PhaseAngleC | uint16 | Degrees | Phase Angle C | Profile phase C angle in degrees. |
Value names:
Output(enum16): 0OFF, 1ONRelay(enum16): 0OPEN, 1CLOSEDRegen(enum16): 0OFF, 1ONEnaProf(enum16): 0STOP, 1START, 2TRIGGERProfRslt(enum16): 0IN_PROGRESS, 1COMPLETED, 2FAILED
Model 64412: DER Cyber Exploitation
Name in records: DERExploitation.
Operations that represent a hacked DER device
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
DAManipulation | enum16 | DA Manipulation | Modify the device ID of the DER | |
FalsifyDeviceIdentity | enum16 | Falsify Device Identity | Change the DER manufacturer and model | |
MeasPAlwaysNameplate | enum16 | Meas P Always Nameplate | Set the DER meas to always be at nameplate power | |
MeasQAlwaysMinimum | enum16 | Meas Q Always Minimum | Set the DER to always be at minimum reactive power | |
MeasQAlwaysMaximum | enum16 | Meas Q Always Maximum | Set the DER to always be at maximum reactive power | |
MeasQAlwaysZero | enum16 | Meas Q Always Zero | Set the DER to always be at zero reactive power | |
MeasZeroP | enum16 | Meas Zero P | Set the DER to always be at zero P, Q, and S | |
MeasInvertQ | enum16 | Meas Invert Q | Set the DER to reverse the Q measurement data | |
MeasLowV | enum16 | Meas Low V | Set the DER to always measure low voltage | |
MeasHighV | enum16 | Meas High V | Set the DER to always measure high voltage | |
MeasLowL1V | enum16 | Meas Low L1 V | Set the DER to always measure low line 1 voltage | |
MeasHighL1V | enum16 | Meas High L1 V | Set the DER to always measure high line 1 voltage | |
MeasLowF | enum16 | Meas Low F | Set the DER to always measure low frequency | |
MeasHighF | enum16 | Meas High F | Set the DER to always measure high frequency | |
MeasLowAmps | enum16 | Meas Low Amps | Set the DER to always measure low current | |
MeasHighAmps | enum16 | Meas High Amps | Set the DER to always measure high current | |
MeasHighS | enum16 | Meas High S | Set the DER to always measure high apparent power | |
MeasLowS | enum16 | Meas Low S | Set the DER to always measure low apparent power | |
MeasHighQ | enum16 | Meas High Q | Set the DER to always measure high reactive power | |
MeasLowQ | enum16 | Meas Low Q | Set the DER to always measure low reactive power | |
MeasLowPF | enum16 | Meas Low PF | Set the DER to always measure low power factor | |
MeasLowReversedPF | enum16 | Meas Low Reversed PF | Set the DER to always measure low reversed power factor | |
NameplateHighP | enum16 | Nameplate High P | Set the DER nameplate power to be high | |
NameplateLowP | enum16 | Nameplate Low P | Set the DER nameplate power to be low | |
NameplateHighS | enum16 | Nameplate High S | Set the DER nameplate apparent power to be high | |
NameplateLowS | enum16 | Nameplate Low S | Set the DER nameplate apparent power to be low | |
NameplateHighQ | enum16 | Nameplate High Q | Set the DER nameplate reactive power to be high | |
NameplateLowQ | enum16 | Nameplate Low Q | Set the DER nameplate reactive power to be low | |
NameplateHighNomV | enum16 | Nameplate High Nom V | Set the DER nameplate voltage to be high | |
NameplateLowNomV | enum16 | Nameplate Low Nom V | Set the DER nameplate voltage to be low | |
NameplateLowAmps | enum16 | Nameplate Low Amps | Set the DER nameplate current to be low | |
NameplateLowVarmaxinj | enum16 | Nameplate Low Varmaxinj | Set the DER nameplate VarMaxInj to be low | |
NameplateLowVarmaxabs | enum16 | Nameplate Low Varmaxabs | Set the DER nameplate VarMaxAbs to be low | |
NameplateLowPF | enum16 | Nameplate Low PF | Set the DER nameplate power factor to be low | |
SettingsHighNomV | enum16 | Settings High Nom V | Set the DER settings voltage to be high | |
SettingsLowAmps | enum16 | Settings Low Amps | Set the DER settings current to be low | |
SettingsHighP | enum16 | Settings High P | Set the DER settings power to be high | |
SettingsLowP | enum16 | Settings Low P | Set the DER settings power to be low | |
SettingsHighVAMax | enum16 | Settings High VAMax | Set the DER settings VAMax to be high | |
SettingsHighVarmaxinj | enum16 | Settings High Varmaxinj | Set the DER settings VarMaxInj to be high | |
SettingsHighVarmaxabs | enum16 | Settings High Varmaxabs | Set the DER settings VarMaxAbs to be high | |
ChangeCommonModelID | enum16 | Change Common Model ID | Change the common model ID | |
ChangeCommonModelLength | enum16 | Change Common Model Length | Change the common model length |
Value names:
DAManipulation(enum16): 0OFF, 1ONFalsifyDeviceIdentity(enum16): 0OFF, 1ONMeasPAlwaysNameplate(enum16): 0OFF, 1ONMeasQAlwaysMinimum(enum16): 0OFF, 1ONMeasQAlwaysMaximum(enum16): 0OFF, 1ONMeasQAlwaysZero(enum16): 0OFF, 1ONMeasZeroP(enum16): 0OFF, 1ONMeasInvertQ(enum16): 0OFF, 1ONMeasLowV(enum16): 0OFF, 1ONMeasHighV(enum16): 0OFF, 1ONMeasLowL1V(enum16): 0OFF, 1ONMeasHighL1V(enum16): 0OFF, 1ONMeasLowF(enum16): 0OFF, 1ONMeasHighF(enum16): 0OFF, 1ONMeasLowAmps(enum16): 0OFF, 1ONMeasHighAmps(enum16): 0OFF, 1ONMeasHighS(enum16): 0OFF, 1ONMeasLowS(enum16): 0OFF, 1ONMeasHighQ(enum16): 0OFF, 1ONMeasLowQ(enum16): 0OFF, 1ONMeasLowPF(enum16): 0OFF, 1ONMeasLowReversedPF(enum16): 0OFF, 1ONNameplateHighP(enum16): 0OFF, 1ONNameplateLowP(enum16): 0OFF, 1ONNameplateHighS(enum16): 0OFF, 1ONNameplateLowS(enum16): 0OFF, 1ONNameplateHighQ(enum16): 0OFF, 1ONNameplateLowQ(enum16): 0OFF, 1ONNameplateHighNomV(enum16): 0OFF, 1ONNameplateLowNomV(enum16): 0OFF, 1ONNameplateLowAmps(enum16): 0OFF, 1ONNameplateLowVarmaxinj(enum16): 0OFF, 1ONNameplateLowVarmaxabs(enum16): 0OFF, 1ONNameplateLowPF(enum16): 0OFF, 1ONSettingsHighNomV(enum16): 0OFF, 1ONSettingsLowAmps(enum16): 0OFF, 1ONSettingsHighP(enum16): 0OFF, 1ONSettingsLowP(enum16): 0OFF, 1ONSettingsHighVAMax(enum16): 0OFF, 1ONSettingsHighVarmaxinj(enum16): 0OFF, 1ONSettingsHighVarmaxabs(enum16): 0OFF, 1ONChangeCommonModelID(enum16): 0OFF, 1ONChangeCommonModelLength(enum16): 0OFF, 1ON
Model 64413: PV Curves
Name in records: PVSimCurves.
Current-Voltage and Power-Voltage Profiles for PV Simulation.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
IVLen | count | IV length | Number of points in the IV curve. | |
Irr | uint16 | W/m^2 | POA Irradiance | Plane of Array Irradiance |
IV[*].P | float32 | W | Power | Power |
IV[*].I | float32 | A | Current | Current |
IV[*].V | float32 | V | Voltage | Voltage |
Model 64414: DER Simulation Controls
Name in records: DERSimControls.
Configuration parameters for the DER device simulator.
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
Time | string | Time offset | Time offset for simulation formatted 'HH:MM:SS' | |
Temperature | float32 | Ambient temperature (degrees Celsius) | ||
GridModelSource | string | The data source for the grid model. 'csv' or 'const' | ||
IrradianceModelSource | string | The data source for the irradiance model. 'csv' or 'const' | ||
Irradiance | float32 | The irradiance on the DER device (W/m^2) for the 'const' irradiance model | ||
GridVoltageA | float32 | Phase A RMS Voltage (pu) for the 'const' grid model | ||
GridVoltageB | float32 | Phase B RMS Voltage (pu) for the 'const' grid model | ||
GridVoltageC | float32 | Phase C RMS Voltage (pu) for the 'const' grid model | ||
GridFrequency | float32 | Grid frequency (Hz) for the 'const' grid model |
Model 64415: CSIP Client Control
Name in records: CSIPControl.
CSIP Client Control for Alarms and Error tests
| Point | Type | Units | Label | Description |
|---|---|---|---|---|
LogEventEna | enum16 | LogEvent Mode Enable | Enable or disable the LogEvent mode | |
HTTPMsg | enum16 | HTTP Message Mode Enable | Enable or disable the HTTP Message mode | |
COMM004Cert | enum16 | COMM-004 Certificate | Select COMM-004 certificate type | |
SubscribedResource | string | Subscribed Resource URL | The URL of the resource to subscribe to | |
SubscriptionEna | enum16 | Subscribtion Enable | Enable or disable the Subscription mode |
Value names:
LogEventEna(enum16): 0DISABLED, 1ENABLEDHTTPMsg(enum16): 0DISABLED, 1ENABLEDCOMM004Cert(enum16): 0Default Certificate, 1COMM_004A, 2COMM_004B, 3COMM_004C, 4COMM_004D, 5COMM_004E, 6COMM_004F, 7COMM_004GSubscriptionEna(enum16): 0DISABLED, 1ENABLED