Storage

Point names are the ones records use; [*] stands for a repeating group's index. See Supported SunSpec models for every group.

Model	Name in records	Points
801	`storage`	1
802	`battery`	44
803	`lithium_ion_bank`	44
804	`lithium_ion_string`	41
805	`lithium-ion-module`	23
806	`flow_battery`	2
807	`flow_battery_string`	44
808	`flow_battery_module`	2
809	`flow_battery_stack`	2

Model 801: Energy Storage Base Model (DEPRECATED)

Name in records: storage.

This model has been deprecated.

Point	Type	Units	Label	Description
`DEPRECATED`	enum16		Deprecated Model	This model has been deprecated.

Model 802: Battery Base Model

Name in records: battery.

Point	Type	Units	Label	Description
`AHRtg`	uint16	Ah	Nameplate Charge Capacity	Nameplate charge capacity in amp-hours.
`WHRtg`	uint16	Wh	Nameplate Energy Capacity	Nameplate energy capacity in DC watt-hours.
`WChaRteMax`	uint16	W	Nameplate Max Charge Rate	Maximum rate of energy transfer into the storage device in DC watts.
`WDisChaRteMax`	uint16	W	Nameplate Max Discharge Rate	Maximum rate of energy transfer out of the storage device in DC watts.
`DisChaRte`	uint16	%WHRtg	Self Discharge Rate	Self discharge rate. Percentage of capacity (WHRtg) discharged per day.
`SoCMax`	uint16	%WHRtg	Nameplate Max SoC	Manufacturer maximum state of charge, expressed as a percentage.
`SoCMin`	uint16	%WHRtg	Nameplate Min SoC	Manufacturer minimum state of charge, expressed as a percentage.
`SocRsvMax`	uint16	%WHRtg	Max Reserve Percent	Setpoint for maximum reserve for storage as a percentage of the nominal maximum storage.
`SoCRsvMin`	uint16	%WHRtg	Min Reserve Percent	Setpoint for minimum reserve for storage as a percentage of the nominal maximum storage.
`SoC`	uint16	%WHRtg	State of Charge	State of charge, expressed as a percentage.
`DoD`	uint16	%	Depth of Discharge	Depth of discharge, expressed as a percentage.
`SoH`	uint16	%	State of Health	Percentage of battery life remaining.
`NCyc`	uint32		Cycle Count	Number of cycles executed in the battery.
`ChaSt`	enum16		Charge Status	Charge status of storage device. Enumeration.
`LocRemCtl`	enum16		Control Mode	Battery control mode. Enumeration.
`Hb`	uint16		Battery Heartbeat	Value is incremented every second with periodic resets to zero.
`CtrlHb`	uint16		Controller Heartbeat	Value is incremented every second with periodic resets to zero.
`AlmRst`	uint16		Alarm Reset	Used to reset any latched alarms. 1 = Reset.
`Typ`	enum16		Battery Type	Type of battery. Enumeration.
`State`	enum16		State of the Battery Bank	State of the battery bank. Enumeration.
`StateVnd`	enum16		Vendor Battery Bank State	Vendor specific battery bank state. Enumeration.
`WarrDt`	uint32		Warranty Date	Date the device warranty expires.
`Evt1`	bitfield32		Battery Event 1 Bitfield	Alarms and warnings.
`Evt2`	bitfield32		Battery Event 2 Bitfield	Alarms and warnings.
`EvtVnd1`	bitfield32		Vendor Event Bitfield 1	Vendor defined events.
`EvtVnd2`	bitfield32		Vendor Event Bitfield 2	Vendor defined events.
`V`	uint16	V	External Battery Voltage	DC Bus Voltage.
`VMax`	uint16	V	Max Battery Voltage	Instantaneous maximum battery voltage.
`VMin`	uint16	V	Min Battery Voltage	Instantaneous minimum battery voltage.
`CellVMax`	uint16	V	Max Cell Voltage	Maximum voltage for all cells in the bank.
`CellVMaxStr`	uint16		Max Cell Voltage String	String containing the cell with maximum voltage.
`CellVMaxMod`	uint16		Max Cell Voltage Module	Module containing the cell with maximum voltage.
`CellVMin`	uint16	V	Min Cell Voltage	Minimum voltage for all cells in the bank.
`CellVMinStr`	uint16		Min Cell Voltage String	String containing the cell with minimum voltage.
`CellVMinMod`	uint16		Min Cell Voltage Module	Module containing the cell with minimum voltage.
`CellVAvg`	uint16	V	Average Cell Voltage	Average cell voltage for all cells in the bank.
`A`	int16	A	Total DC Current	Total DC current flowing to/from the battery bank.
`AChaMax`	uint16	A	Max Charge Current	Instantaneous maximum DC charge current.
`ADisChaMax`	uint16	A	Max Discharge Current	Instantaneous maximum DC discharge current.
`W`	int16	W	Total Power	Total power flowing to/from the battery bank.
`ReqInvState`	enum16		Inverter State Request	Request from battery to start or stop the inverter. Enumeration.
`ReqW`	int16	W	Battery Power Request	AC Power requested by battery.
`SetOp`	enum16		Set Operation	Instruct the battery bank to perform an operation such as connecting. Enumeration.
`SetInvState`	enum16		Set Inverter State	Set the current state of the inverter.

Value names:

ChaSt (enum16): 1 OFF, 2 EMPTY, 3 DISCHARGING, 4 CHARGING, 5 FULL, 6 HOLDING, 7 TESTING
LocRemCtl (enum16): 0 REMOTE, 1 LOCAL
Typ (enum16): 0 NOT APPLICABLE_UNKNOWN, 1 LEAD_ACID, 2 NICKEL_METAL_HYDRATE, 3 NICKEL_CADMIUM, 4 LITHIUM_ION, 5 CARBON_ZINC, 6 ZINC_CHLORIDE, 7 ALKALINE, 8 RECHARGEABLE_ALKALINE, 9 SODIUM_SULFUR, 10 FLOW, 99 OTHER
State (enum16): 1 DISCONNECTED, 2 INITIALIZING, 3 CONNECTED, 4 STANDBY, 5 SOC PROTECTION, 6 SUSPENDING, 99 FAULT
Evt1 (bitfield32): bit 0 COMMUNICATION_ERROR, bit 1 OVER_TEMP_ALARM, bit 2 OVER_TEMP_WARNING, bit 3 UNDER_TEMP_ALARM, bit 4 UNDER_TEMP_WARNING, bit 5 OVER_CHARGE_CURRENT_ALARM, bit 6 OVER_CHARGE_CURRENT_WARNING, bit 7 OVER_DISCHARGE_CURRENT_ALARM, bit 8 OVER_DISCHARGE_CURRENT_WARNING, bit 9 OVER_VOLT_ALARM, bit 10 OVER_VOLT_WARNING, bit 11 UNDER_VOLT_ALARM, bit 12 UNDER_VOLT_WARNING, bit 13 UNDER_SOC_MIN_ALARM, bit 14 UNDER_SOC_MIN_WARNING, bit 15 OVER_SOC_MAX_ALARM, bit 16 OVER_SOC_MAX_WARNING, bit 17 VOLTAGE_IMBALANCE_WARNING, bit 18 TEMPERATURE_IMBALANCE_ALARM, bit 19 TEMPERATURE_IMBALANCE_WARNING, bit 20 CONTACTOR_ERROR, bit 21 FAN_ERROR, bit 22 GROUND_FAULT, bit 23 OPEN_DOOR_ERROR, bit 24 CURRENT_IMBALANCE_WARNING, bit 25 OTHER_ALARM, bit 26 OTHER_WARNING, bit 27 RESERVED_1, bit 28 CONFIGURATION_ALARM, bit 29 CONFIGURATION_WARNING
ReqInvState (enum16): 0 NO REQUEST, 1 START, 2 STOP
SetOp (enum16): 1 CONNECT, 2 DISCONNECT
SetInvState (enum16): 1 INVERTER_STOPPED, 2 INVERTER_STANDBY, 3 INVERTER_STARTED

Model 803: Lithium-Ion Battery Bank Model

Name in records: lithium_ion_bank.

Point	Type	Units	Label	Description
`NStr`	uint16		String Count	Number of strings in the bank.
`NStrCon`	uint16		Connected String Count	Number of strings with contactor closed.
`ModTmpMax`	int16	C	Max Module Temperature	Maximum temperature for all modules in the bank.
`ModTmpMaxStr`	uint16		Max Module Temperature String	String containing the module with maximum temperature.
`ModTmpMaxMod`	uint16		Max Module Temperature Module	Module with maximum temperature.
`ModTmpMin`	int16	C	Min Module Temperature	Minimum temperature for all modules in the bank.
`ModTmpMinStr`	uint16		Min Module Temperature String	String containing the module with minimum temperature.
`ModTmpMinMod`	uint16		Min Module Temperature Module	Module with minimum temperature.
`ModTmpAvg`	int16	C	Average Module Temperature	Average temperature for all modules in the bank.
`StrVMax`	uint16	V	Max String Voltage	Maximum string voltage for all strings in the bank.
`StrVMaxStr`	uint16		Max String Voltage String	String with maximum voltage.
`StrVMin`	uint16	V	Min String Voltage	Minimum string voltage for all strings in the bank.
`StrVMinStr`	uint16		Min String Voltage String	String with minimum voltage.
`StrVAvg`	uint16	V	Average String Voltage	Average string voltage for all strings in the bank.
`StrAMax`	int16	A	Max String Current	Maximum current of any string in the bank.
`StrAMaxStr`	uint16		Max String Current String	String with the maximum current.
`StrAMin`	int16	A	Min String Current	Minimum current of any string in the bank.
`StrAMinStr`	uint16		Min String Current String	String with the minimum current.
`StrAAvg`	int16	A	Average String Current	Average string current for all strings in the bank.
`NCellBal`	uint16		Battery Cell Balancing Count	Total number of cells that are currently being balanced.
`string[*].StrNMod`	uint16		Module Count	Count of modules in the string.
`string[*].StrSt`	bitfield32		String Status	Current status of the string.
`string[*].StrConFail`	enum16		Connection Failure Reason
`string[*].StrSoC`	uint16	%	String State of Charge	Battery string state of charge, expressed as a percentage.
`string[*].StrSoH`	uint16	%	String State of Health	Battery string state of health, expressed as a percentage.
`string[*].StrA`	int16	A	String Current	String current measurement.
`string[*].StrCellVMax`	uint16	V	Max Cell Voltage	Maximum voltage for all cells in the string.
`string[*].StrCellVMaxMod`	uint16		Max Cell Voltage Module	Module containing the maximum cell voltage.
`string[*].StrCellVMin`	uint16	V	Min Cell Voltage	Minimum voltage for all cells in the string.
`string[*].StrCellVMinMod`	uint16		Min Cell Voltage Module	Module containing the minimum cell voltage.
`string[*].StrCellVAvg`	uint16	V	Average Cell Voltage	Average voltage for all cells in the string.
`string[*].StrModTmpMax`	int16	C	Max Module Temperature	Maximum temperature for all modules in the bank.
`string[*].StrModTmpMaxMod`	uint16		Max Module Temperature Module	Module with the maximum temperature.
`string[*].StrModTmpMin`	int16	C	Min Module Temperature	Minimum temperature for all modules in the bank.
`string[*].StrModTmpMinMod`	uint16		Min Module Temperature Module	Module with the minimum temperature.
`string[*].StrModTmpAvg`	int16	C	Average Module Temperature	Average temperature for all modules in the bank.
`string[*].StrDisRsn`	enum16		Disabled Reason	Reason why the string is currently disabled.
`string[*].StrConSt`	bitfield32		Contactor Status	Status of the contactor(s) for the string.
`string[*].StrEvt1`	bitfield32		String Event 1	Alarms, warnings and status values.
`string[*].StrEvt2`	bitfield32		String Event 2	Alarms, warnings and status values.
`string[*].StrEvtVnd1`	bitfield32		Vendor String Event Bitfield 1	Vendor defined events.
`string[*].StrEvtVnd2`	bitfield32		Vendor String Event Bitfield 2	Vendor defined events.
`string[*].StrSetEna`	enum16		Enable/Disable String	Enables and disables the string.
`string[*].StrSetCon`	enum16		Connect/Disconnect String	Connects and disconnects the string.

Value names:

string[*].StrSt (bitfield32): bit 0 STRING_ENABLED, bit 1 CONTACTOR_STATUS
string[*].StrConFail (enum16): 0 NO_FAILURE, 1 BUTTON_PUSHED, 2 STR_GROUND_FAULT, 3 OUTSIDE_VOLTAGE_RANGE, 4 STRING_NOT_ENABLED, 5 FUSE_OPEN, 6 CONTACTOR_FAILURE, 7 PRECHARGE_FAILURE, 8 STRING_FAULT
string[*].StrDisRsn (enum16): 0 NONE, 1 FAULT, 2 MAINTENANCE, 3 EXTERNAL, 4 OTHER
string[*].StrConSt (bitfield32): bit 0 CONTACTOR_0, bit 1 CONTACTOR_1, bit 2 CONTACTOR_2, bit 3 CONTACTOR_3, bit 4 CONTACTOR_4, bit 5 CONTACTOR_5, bit 6 CONTACTOR_6, bit 7 CONTACTOR_7, bit 8 CONTACTOR_8, bit 9 CONTACTOR_9, bit 10 CONTACTOR_10, bit 11 CONTACTOR_11, bit 12 CONTACTOR_12, bit 13 CONTACTOR_13, bit 14 CONTACTOR_14, bit 15 CONTACTOR_15, bit 16 CONTACTOR_16, bit 17 CONTACTOR_17, bit 18 CONTACTOR_18, bit 19 CONTACTOR_19, bit 20 CONTACTOR_20, bit 21 CONTACTOR_21, bit 22 CONTACTOR_22, bit 23 CONTACTOR_23, bit 24 CONTACTOR_24, bit 25 CONTACTOR_25, bit 26 CONTACTOR_26, bit 27 CONTACTOR_27, bit 28 CONTACTOR_28, bit 29 CONTACTOR_29, bit 30 CONTACTOR_30
string[*].StrEvt1 (bitfield32): bit 0 COMMUNICATION_ERROR, bit 1 OVER_TEMP_ALARM, bit 2 OVER_TEMP_WARNING, bit 3 UNDER_TEMP_ALARM, bit 4 UNDER_TEMP_WARNING, bit 5 OVER_CHARGE_CURRENT_ALARM, bit 6 OVER_CHARGE_CURRENT_WARNING, bit 7 OVER_DISCHARGE_CURRENT_ALARM, bit 8 OVER_DISCHARGE_CURRENT_WARNING, bit 9 OVER_VOLT_ALARM, bit 10 OVER_VOLT_WARNING, bit 11 UNDER_VOLT_ALARM, bit 12 UNDER_VOLT_WARNING, bit 13 UNDER_SOC_MIN_ALARM, bit 14 UNDER_SOC_MIN_WARNING, bit 15 OVER_SOC_MAX_ALARM, bit 16 OVER_SOC_MAX_WARNING, bit 17 VOLTAGE_IMBALANCE_WARNING, bit 18 TEMPERATURE_IMBALANCE_ALARM, bit 19 TEMPERATURE_IMBALANCE_WARNING, bit 20 CONTACTOR_ERROR, bit 21 FAN_ERROR, bit 22 GROUND_FAULT, bit 23 OPEN_DOOR_ERROR, bit 24 RESERVED_1, bit 25 OTHER_ALARM, bit 26 OTHER_WARNING, bit 27 RESERVED_2, bit 28 CONFIGURATION_ALARM, bit 29 CONFIGURATION_WARNING
string[*].StrSetEna (enum16): 1 ENABLE_STRING, 2 DISABLE_STRING
string[*].StrSetCon (enum16): 1 CONNECT_STRING, 2 DISCONNECT_STRING

Model 804: Lithium-Ion String Model

Name in records: lithium_ion_string.

Point	Type	Units	Label	Description
`Idx`	uint16		String Index	Index of the string within the bank.
`NMod`	uint16		Module Count	Count of modules in the string.
`St`	bitfield32		String Status	Current status of the string.
`ConFail`	enum16		Connection Failure Reason
`NCellBal`	uint16		String Cell Balancing Count	Number of cells currently being balanced in the string.
`SoC`	uint16	%	String State of Charge	Battery string state of charge, expressed as a percentage.
`DoD`	uint16	%	String Depth of Discharge	Depth of discharge for the string, expressed as a percentage.
`NCyc`	uint32		String Cycle Count	Number of discharge cycles executed upon the string.
`SoH`	uint16	%	String State of Health	Battery string state of health, expressed as a percentage.
`A`	int16	A	String Current	String current measurement.
`V`	uint16	V	String Voltage	String voltage measurement.
`CellVMax`	uint16	V	Max Cell Voltage	Maximum voltage for all cells in the string.
`CellVMaxMod`	uint16		Max Cell Voltage Module	Module containing the cell with maximum cell voltage.
`CellVMin`	uint16	V	Min Cell Voltage	Minimum voltage for all cells in the string.
`CellVMinMod`	uint16		Min Cell Voltage Module	Module containing the cell with minimum cell voltage.
`CellVAvg`	uint16	V	Average Cell Voltage	Average voltage for all cells in the string.
`ModTmpMax`	int16	C	Max Module Temperature	Maximum temperature for all modules in the string.
`ModTmpMaxMod`	uint16		Max Module Temperature Module	Module with the maximum temperature.
`ModTmpMin`	int16	C	Min Module Temperature	Minimum temperature for all modules in the string.
`ModTmpMinMod`	uint16		Min Module Temperature Module	Module with the minimum temperature.
`ModTmpAvg`	int16	C	Average Module Temperature	Average temperature for all modules in the string.
`ConSt`	bitfield32		Contactor Status	Status of the contactor(s) for the string.
`Evt1`	bitfield32		String Event 1	Alarms, warnings and status values.
`Evt2`	bitfield32		String Event 2	Alarms, warnings and status values.
`EvtVnd1`	bitfield32		Vendor Event Bitfield 1	Vendor defined events.
`EvtVnd2`	bitfield32		Vendor Event Bitfield 2	Vendor defined events.
`SetEna`	enum16		Enable/Disable String	Enables and disables the string. Should reset to 0 upon completion.
`SetCon`	enum16		Connect/Disconnect String	Connects and disconnects the string.
`lithium_ion_string_module[*].ModNCell`	uint16		Module Cell Count	Count of all cells in the module.
`lithium_ion_string_module[*].ModSoC`	uint16	%	Module SoC	Module state of charge, expressed as a percentage.
`lithium_ion_string_module[*].ModSoH`	uint16	%	Module SoH	Module state of health, expressed as a percentage.
`lithium_ion_string_module[*].ModCellVMax`	uint16	V	Max Cell Voltage	Maximum voltage for all cells in the module.
`lithium_ion_string_module[*].ModCellVMaxCell`	uint16		Max Cell Voltage Cell	Cell with maximum voltage.
`lithium_ion_string_module[*].ModCellVMin`	uint16	V	Min Cell Voltage	Minimum voltage for all cells in the module.
`lithium_ion_string_module[*].ModCellVMinCell`	uint16		Min Cell Voltage Cell	Cell with minimum voltage.
`lithium_ion_string_module[*].ModCellVAvg`	uint16	V	Average Cell Voltage	Average voltage for all cells in the module.
`lithium_ion_string_module[*].ModCellTmpMax`	int16	C	Max Cell Temperature	Maximum temperature for all cells in the module.
`lithium_ion_string_module[*].ModCellTmpMaxCell`	uint16		Max Cell Temperature Cell	Cell with maximum temperature.
`lithium_ion_string_module[*].ModCellTmpMin`	int16	C	Min Cell Temperature	Minimum temperature for all cells in the module.
`lithium_ion_string_module[*].ModCellTmpMinCell`	uint16		Min Cell Temperature Cell	Cell with minimum temperature.
`lithium_ion_string_module[*].ModCellTmpAvg`	int16	C	Average Cell Temperature	Average temperature for all cells in the module.

Value names:

St (bitfield32): bit 0 STRING_ENABLED, bit 1 CONTACTOR_STATUS
ConFail (enum16): 0 NO_FAILURE, 1 BUTTON_PUSHED, 2 STR_GROUND_FAULT, 3 OUTSIDE_VOLTAGE_RANGE, 4 STRING_NOT_ENABLED, 5 FUSE_OPEN, 6 CONTACTOR_FAILURE, 7 PRECHARGE_FAILURE, 8 STRING_FAULT
ConSt (bitfield32): bit 0 CONTACTOR_0, bit 1 CONTACTOR_1, bit 2 CONTACTOR_2, bit 3 CONTACTOR_3, bit 4 CONTACTOR_4, bit 5 CONTACTOR_5, bit 6 CONTACTOR_6, bit 7 CONTACTOR_7, bit 8 CONTACTOR_8, bit 9 CONTACTOR_9, bit 10 CONTACTOR_10, bit 11 CONTACTOR_11, bit 12 CONTACTOR_12, bit 13 CONTACTOR_13, bit 14 CONTACTOR_14, bit 15 CONTACTOR_15, bit 16 CONTACTOR_16, bit 17 CONTACTOR_17, bit 18 CONTACTOR_18, bit 19 CONTACTOR_19, bit 20 CONTACTOR_20, bit 21 CONTACTOR_21, bit 22 CONTACTOR_22, bit 23 CONTACTOR_23, bit 24 CONTACTOR_24, bit 25 CONTACTOR_25, bit 26 CONTACTOR_26, bit 27 CONTACTOR_27, bit 28 CONTACTOR_28, bit 29 CONTACTOR_29, bit 30 CONTACTOR_30
Evt1 (bitfield32): bit 0 COMMUNICATION_ERROR, bit 1 OVER_TEMP_ALARM, bit 2 OVER_TEMP_WARNING, bit 3 UNDER_TEMP_ALARM, bit 4 UNDER_TEMP_WARNING, bit 5 OVER_CHARGE_CURRENT_ALARM, bit 6 OVER_CHARGE_CURRENT_WARNING, bit 7 OVER_DISCHARGE_CURRENT_ALARM, bit 8 OVER_DISCHARGE_CURRENT_WARNING, bit 9 OVER_VOLT_ALARM, bit 10 OVER_VOLT_WARNING, bit 11 UNDER_VOLT_ALARM, bit 12 UNDER_VOLT_WARNING, bit 13 UNDER_SOC_MIN_ALARM, bit 14 UNDER_SOC_MIN_WARNING, bit 15 OVER_SOC_MAX_ALARM, bit 16 OVER_SOC_MAX_WARNING, bit 17 VOLTAGE_IMBALANCE_WARNING, bit 18 TEMPERATURE_IMBALANCE_ALARM, bit 19 TEMPERATURE_IMBALANCE_WARNING, bit 20 CONTACTOR_ERROR, bit 21 FAN_ERROR, bit 22 GROUND_FAULT, bit 23 OPEN_DOOR_ERROR, bit 24 RESERVED_1, bit 25 OTHER_ALARM, bit 26 OTHER_WARNING, bit 27 RESERVED_2, bit 28 CONFIGURATION_ALARM, bit 29 CONFIGURATION_WARNING
SetCon (enum16): 1 CONNECT_STRING, 2 DISCONNECT_STRING

Model 805: Lithium-Ion Module Model

Name in records: lithium-ion-module.

Point	Type	Units	Label	Description
`StrIdx`	uint16		String Index	Index of the string containing the module.
`ModIdx`	uint16		Module Index	Index of the module within the string.
`NCell`	uint16		Module Cell Count	Count of all cells in the module.
`SoC`	uint16	%	Module SoC	Module state of charge, expressed as a percentage.
`DoD`	uint16	%	Depth of Discharge	Depth of discharge for the module.
`SoH`	uint16	%	Module SoH	Module state of health, expressed as a percentage.
`NCyc`	uint32		Cycle Count	Count of cycles executed.
`V`	uint16	V	Module Voltage	Voltage of the module.
`CellVMax`	uint16	V	Max Cell Voltage	Maximum voltage for all cells in the module.
`CellVMaxCell`	uint16		Max Cell Voltage Cell	Cell with the maximum voltage.
`CellVMin`	uint16	V	Min Cell Voltage	Minimum voltage for all cells in the module.
`CellVMinCell`	uint16		Min Cell Voltage Cell	Cell with the minimum voltage.
`CellVAvg`	uint16	V	Average Cell Voltage	Average voltage for all cells in the module.
`CellTmpMax`	int16	C	Max Cell Temperature	Maximum temperature for all cells in the module.
`CellTmpMaxCell`	uint16		Max Cell Temperature Cell	Cell with the maximum cell temperature.
`CellTmpMin`	int16	C	Min Cell Temperature	Minimum temperature for all cells in the module.
`CellTmpMinCell`	uint16		Min Cell Temperature Cell	Cell with the minimum cell temperature.
`CellTmpAvg`	int16	C	Average Cell Temperature	Average temperature for all cells in the module.
`NCellBal`	uint16		Balanced Cell Count	Number of cells currently being balanced in the module.
`SN`	string		Serial Number	Serial number for the module.
`lithium-ion-module-cell[*].CellV`	uint16	V	Cell Voltage	Cell terminal voltage.
`lithium-ion-module-cell[*].CellTmp`	int16	C	Cell Temperature	Cell temperature.
`lithium-ion-module-cell[*].CellSt`	bitfield32		Cell Status	Status of the cell.

Value names:

lithium-ion-module-cell[*].CellSt (bitfield32): bit 0 CELL_IS_BALANCING

Model 806: Flow Battery Model

Name in records: flow_battery.

Point	Type	Units	Label	Description
`BatTBD`	uint16		Battery Points To Be Determined
`battery_string[*].BatStTBD`	uint16		Battery String Points To Be Determined

Model 807: Flow Battery String Model

Name in records: flow_battery_string.

Point	Type	Units	Label	Description
`Idx`	uint16		String Index	Index of the string within the bank.
`NMod`	uint16		Module Count	Number of modules in this string.
`NModCon`	uint16		Connected Module Count	Number of electrically connected modules in this string.
`ModVMax`	uint16	V	Max Module Voltage	Maximum voltage for all modules in the string.
`ModVMaxMod`	uint16		Max Module Voltage Module	Module with the maximum voltage.
`ModVMin`	uint16	V	Min Module Voltage	Minimum voltage for all modules in the string.
`ModVMinMod`	uint16		Min Module Voltage Module	Module with the minimum voltage.
`ModVAvg`	uint16	V	Average Module Voltage	Average voltage for all modules in the string.
`CellVMax`	uint16	V	Max Cell Voltage	Maximum voltage for all cells in the string.
`CellVMaxMod`	uint16		Max Cell Voltage Module	Module containing the cell with the maximum voltage.
`CellVMaxStk`	uint16		Max Cell Voltage Stack	Stack containing the cell with the maximum voltage.
`CellVMin`	uint16	V	Min Cell Voltage	Minimum voltage for all cells in the string.
`CellVMinMod`	uint16		Min Cell Voltage Module	Module containing the cell with the minimum voltage.
`CellVMinStk`	uint16		Min Cell Voltage Stack	Stack containing the cell with the minimum voltage.
`CellVAvg`	uint16	V	Average Cell Voltage	Average voltage for all cells in the string.
`TmpMax`	int16	C	Max Temperature	Maximum electrolyte temperature for all modules in the string.
`TmpMaxMod`	uint16		Max Temperature Module	Module with the maximum temperature.
`TmpMin`	int16	C	Min Temperature	Minimum electrolyte temperature for all modules in the string.
`TmpMinMod`	uint16		Min Temperature Module	Module with the minimum temperature.
`TmpAvg`	int16	C	Average Temperature	Average electrolyte temperature for all modules in the string.
`Evt1`	bitfield32		String Event 1	Alarms, warnings and status values.
`Evt2`	bitfield32		String Event 2	Alarms, warnings and status values.
`EvtVnd1`	bitfield32		Vendor Event Bitfield 1	Vendor defined events.
`EvtVnd2`	bitfield32		Vendor Event Bitfield 2	Vendor defined events.
`module[*].ModIdx`	uint16		Module Index	Index of the module within the string.
`module[*].ModNStk`	uint16		Stack Count	Number of stacks in this module.
`module[*].ModSt`	bitfield32		Module Status	Current status of the module.
`module[*].ModSoC`	uint16	%	Module State of Charge	State of charge for this module.
`module[*].ModOCV`	uint16	V	Open Circuit Voltage	Open circuit voltage for this module.
`module[*].ModV`	uint16	V	External Voltage	External voltage fo this module.
`module[*].ModCellVMax`	uint16	V	Maximum Cell Voltage	Maximum voltage for all cells in this module.
`module[*].ModCellVMaxCell`	uint16		Max Cell Voltage Cell	Cell with the maximum cell voltage.
`module[*].ModCellVMin`	uint16	V	Minimum Cell Voltage	Minimum voltage for all cells in this module.
`module[*].ModCellVMinCell`	uint16		Min Cell Voltage Cell	Cell with the minimum cell voltage.
`module[*].ModCellVAvg`	uint16	V	Average Cell Voltage	Average voltage for all cells in this module.
`module[*].ModAnoTmp`	uint16	C	Anolyte Temperature
`module[*].ModCatTmp`	uint16	C	Catholyte Temperature
`module[*].ModConSt`	bitfield32		Contactor Status
`module[*].ModEvt1`	bitfield32		Module Event 1	Alarms, warnings and status values.
`module[*].ModEvt2`	bitfield32		Module Event 2	Alarms, warnings and status values.
`module[*].ModConFail`	enum16		Connection Failure Reason
`module[*].ModSetEna`	enum16		Enable/Disable Module	Enables and disables the module.
`module[*].ModSetCon`	enum16		Connect/Disconnect Module	Connects and disconnects the module.
`module[*].ModDisRsn`	enum16		Disabled Reason	Reason why the module is currently disabled.

Value names:

Evt1 (bitfield32): bit 0 COMMUNICATION_ERROR, bit 1 OVER_TEMP_ALARM, bit 2 OVER_TEMP_WARNING, bit 3 UNDER_TEMP_ALARM, bit 4 UNDER_TEMP_WARNING, bit 5 OVER_CHARGE_CURRENT_ALARM, bit 6 OVER_CHARGE_CURRENT_WARNING, bit 7 OVER_DISCHARGE_CURRENT_ALARM, bit 8 OVER_DISCHARGE_CURRENT_WARNING, bit 9 OVER_VOLT_ALARM, bit 10 OVER_VOLT_WARNING, bit 11 UNDER_VOLT_ALARM, bit 12 UNDER_VOLT_WARNING, bit 13 UNDER_SOC_MIN_ALARM, bit 14 UNDER_SOC_MIN_WARNING, bit 15 OVER_SOC_MAX_ALARM, bit 16 OVER_SOC_MAX_WARNING, bit 17 VOLTAGE_IMBALANCE_WARNING, bit 18 RESERVED_1, bit 19 RESERVED_2, bit 20 CONTACTOR_ERROR, bit 21 FAN_ERROR, bit 22 GROUND_FAULT, bit 23 OPEN_DOOR_ERROR, bit 24 RESERVED_3, bit 25 OTHER_ALARM, bit 26 OTHER_WARNING, bit 27 FIRE_ALARM, bit 28 CONFIGURATION_ALARM, bit 29 CONFIGURATION_WARNING
Evt2 (bitfield32): bit 0 LEAK_ALARM, bit 1 PUMP_ALARM, bit 2 HIGH_PRESSURE_ALARM, bit 3 HIGH_PRESSURE_WARNING, bit 4 LOW_FLOW_ALARM, bit 5 LOW_FLOW_WARNING
module[*].ModSt (bitfield32): bit 0 MODULE_ENABLED, bit 1 CONTACTOR_STATUS
module[*].ModConSt (bitfield32): bit 0 CONTACTOR_0, bit 1 CONTACTOR_1, bit 2 CONTACTOR_2, bit 3 CONTACTOR_3, bit 4 CONTACTOR_4, bit 5 CONTACTOR_5, bit 6 CONTACTOR_6, bit 7 CONTACTOR_7, bit 8 CONTACTOR_8, bit 9 CONTACTOR_9, bit 10 CONTACTOR_10, bit 11 CONTACTOR_11, bit 12 CONTACTOR_12, bit 13 CONTACTOR_13, bit 14 CONTACTOR_14, bit 15 CONTACTOR_15, bit 16 CONTACTOR_16, bit 17 CONTACTOR_17, bit 18 CONTACTOR_18, bit 19 CONTACTOR_19, bit 20 CONTACTOR_20, bit 21 CONTACTOR_21, bit 22 CONTACTOR_22, bit 23 CONTACTOR_23, bit 24 CONTACTOR_24, bit 25 CONTACTOR_25, bit 26 CONTACTOR_26, bit 27 CONTACTOR_27, bit 28 CONTACTOR_28, bit 29 CONTACTOR_29, bit 30 CONTACTOR_30
module[*].ModEvt1 (bitfield32): bit 0 COMMUNICATION_ERROR, bit 1 OVER_TEMP_ALARM, bit 2 OVER_TEMP_WARNING, bit 3 UNDER_TEMP_ALARM, bit 4 UNDER_TEMP_WARNING, bit 5 OVER_CHARGE_CURRENT_ALARM, bit 6 OVER_CHARGE_CURRENT_WARNING, bit 7 OVER_DISCHARGE_CURRENT_ALARM, bit 8 OVER_DISCHARGE_CURRENT_WARNING, bit 9 OVER_VOLT_ALARM, bit 10 OVER_VOLT_WARNING, bit 11 UNDER_VOLT_ALARM, bit 12 UNDER_VOLT_WARNING, bit 13 UNDER_SOC_MIN_ALARM, bit 14 UNDER_SOC_MIN_WARNING, bit 15 OVER_SOC_MAX_ALARM, bit 16 OVER_SOC_MAX_WARNING, bit 17 VOLTAGE_IMBALANCE_WARNING, bit 18 RESERVED_1, bit 19 RESERVED_2, bit 20 CONTACTOR_ERROR, bit 21 FAN_ERROR, bit 22 GROUND_FAULT, bit 23 OPEN_DOOR_ERROR, bit 24 RESERVED_3, bit 25 RESERVED_4, bit 26 RESERVED_5, bit 27 FIRE_ALARM, bit 28 MODULE_CONFIGURATION_ALARM, bit 29 MODULE_CONFIGURATION_WARNING
module[*].ModEvt2 (bitfield32): bit 0 LEAK_ALARM, bit 1 PUMP_ALARM, bit 2 HIGH_PRESSURE_ALARM, bit 3 HIGH_PRESSURE_WARNING, bit 4 LOW_FLOW_ALARM, bit 5 LOW_FLOW_WARNING
module[*].ModConFail (enum16): 0 NO_FAILURE, 1 BUTTON_PUSHED, 2 MODULE_GROUND_FAULT, 3 OUTSIDE_VOLTAGE_RANGE, 4 MODULE_NOT_ENABLED, 5 FUSE_OPEN, 6 CONTACTOR_FAILURE, 7 PRECHARGE_FAILURE, 8 MODULE_FAULT
module[*].ModSetEna (enum16): 1 ENABLE_MODULE, 2 DISABLE_MODULE
module[*].ModSetCon (enum16): 1 CONNECT_MODULE, 2 DISCONNECT_MODULE
module[*].ModDisRsn (enum16): 0 NONE, 1 FAULT, 2 MAINTENANCE, 3 EXTERNAL, 4 OTHER

Model 808: Flow Battery Module Model

Name in records: flow_battery_module.

Point	Type	Units	Label	Description
`ModuleTBD`	uint16		Module Points To Be Determined
`stack[*].StackTBD`	uint16		Stack Points To Be Determined

Model 809: Flow Battery Stack Model

Name in records: flow_battery_stack.

Point	Type	Units	Label	Description
`StackTBD`	uint16		Stack Points To Be Determined
`cell[*].CellTBD`	uint16		Cell Points To Be Determined

Rusty SunSpec Collector